Pure water: refers to the water in which strong electrolytes and weak electrolytes (such as SiO2, CO2, etc.) are removed or reduced to a certain extent. Its conductivity is generally 1.0-0.1 μ S/cm, resistivity 1-10 M Ω · cm. Salt content ＜ 1mg/L.
Technical features:
Structural features:
Easy to install and maintain.
Process characteristics:
Modular system design with clear process.
Control characteristics:
PLC fully automatic control, equipment fault alarm, safe and stable operation.
Energy conservation and environmental protection:
High one-time water production rate, up to 75%;
The water pump and Plumbing adopt reasonable kinetic energy design to save energy.

Technical parameters:
Water yield: 1T/H-500T/H customizable; Desalination rate: 97-99%;
Recovery rate: 65% -75%; Operating pressure: 0.1MPa-2MPa;
Inflow conductivity ≤ 1000 μ S/cm, effluent conductivity ≤ 1 μ S/cm.
Application field:
Electroplating factories, electronics factories, cosmetics industry, biopharmaceuticals, chemical industry, etc.
Case Process:
Raw water → Raw water tank → Raw water pump → Multi medium filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Secondary reverse osmosis → UV sterilization device → Water point